Makefile: Ignore ubuntu initramfs uninstall fail

this stops the Makefile with an error, if it can not find
`initramfs/ubuntu/setup` (which it wont in case of a non-Ubuntu distro.)

Signed-off-by: Pascal Jäger <pascal.jaeger@leimstift.de>

41_snapshots-btrfs

@@ -91,6 +91,10 @@ btrfs_subvolume_sort="--sort=${GRUB_BTRFS_SUBVOLUME_SORT:-"-rootid"}"
 grub_directory=${GRUB_BTRFS_GRUB_DIRNAME:-"/boot/grub"}
 ## Customize BOOT directory, where kernels/initrams/microcode is saved.
 boot_directory=${GRUB_BTRFS_BOOT_DIRNAME:-"/boot"}
+## Customize GRUB-BTRFS.cfg directory, where "grub-btrfs.cfg" file is saved
+grub_btrfs_directory=${GRUB_BTRFS_GBTRFS_DIRNAME:-"/boot/grub"}
+## Customize directory where "grub-btrfs.cfg" file is searched for by grub
+grub_btrfs_search_directory=${GRUB_BTRFS_GBTRFS_SEARCH_DIRNAME:-"\${prefix}"}
 ## Password protection management for submenu
 # Protection support for submenu (--unrestricted)
 case "${GRUB_BTRFS_DISABLE_PROTECTION_SUBMENU,,}" in
@@ -177,7 +181,7 @@ fi
 ## Create entry
 entry()
 {
-    echo "$@" >> "$grub_directory/grub-btrfs.new"
+    echo "$@" >> "$grub_btrfs_directory/grub-btrfs.new"
 }
 
 ## menu entries
@@ -494,7 +498,7 @@ header_menu()
             local lenght_title_column_right=$(((${#var}-lenght_title_column_left)+1)) #+1 is necessary for extra "|" character
             header_entry+=$(printf "%${lenght_title_column_left}s%${lenght_title_column_right}s" "${title_column[${GRUB_BTRFS_TITLE_FORMAT[$key],,}]}" "|") # Final "|" is for visuals only
         done
-    sed -i "1imenuentry '|${header_entry}' { echo }" "$grub_directory/grub-btrfs.new" # First "|" is for visuals only
+    sed -i "1imenuentry '|${header_entry}' { echo }" "$grub_btrfs_directory/grub-btrfs.new" # First "|" is for visuals only
 }
 
 ## List of kernels, initramfs and microcode in snapshots
@@ -561,11 +565,11 @@ boot_separate()
     IFS=$oldIFS
 }
 
-rm -f "$grub_directory/grub-btrfs.new"
+rm -f "$grub_btrfs_directory/grub-btrfs.new"
-> "$grub_directory/grub-btrfs.new" # Create a "grub-btrfs.new" file in "grub_directory"
+> "$grub_btrfs_directory/grub-btrfs.new" # Create a "grub-btrfs.new" file in "grub_btrfs_directory"
 # Create mount point then mounting
 [[ ! -d $grub_btrfs_mount_point ]] && mkdir -p "$grub_btrfs_mount_point"
-mount -o ro,subvolid=5 /dev/disk/by-uuid/"$root_uuid" "$grub_btrfs_mount_point/"
+mount -o ro,subvolid=5 /dev/disk/by-uuid/"$root_uuid" "$grub_btrfs_mount_point/" > /dev/null
 trap "unmount_grub_btrfs_mount_point" EXIT # unmounting mount point on EXIT signal
 count_warning_menuentries=0 # Count menuentries
 count_limit_snap=0 # Count snapshots
@@ -585,16 +589,16 @@ if [[ "${count_limit_snap}" = "0" || -z "${count_limit_snap}" ]]; then
 fi
 # Make a submenu in GRUB (grub.cfg) and move "grub-btrfs.new" to "grub-btrfs.cfg"
 header_menu
-if "${bindir}/${GRUB_BTRFS_SCRIPT_CHECK:-grub-script-check}" "$grub_directory/grub-btrfs.new"; then
+if "${bindir}/${GRUB_BTRFS_SCRIPT_CHECK:-grub-script-check}" "$grub_btrfs_directory/grub-btrfs.new"; then
-    cat "$grub_directory/grub-btrfs.new" > "$grub_directory/grub-btrfs.cfg"
+    cat "$grub_btrfs_directory/grub-btrfs.new" > "$grub_btrfs_directory/grub-btrfs.cfg"
-    rm -f "$grub_directory/grub-btrfs.new"
+    rm -f "$grub_btrfs_directory/grub-btrfs.new"
     cat << EOF
 submenu '${submenuname}' ${protection_authorized_users}${unrestricted_access_submenu}{
-    configfile "\${prefix}/grub-btrfs.cfg"
+    configfile "${grub_btrfs_search_directory}/grub-btrfs.cfg"
 }
 EOF
 else
-    print_error "Syntax errors were detected in generated ${grub_directory}/grub-btrfs.new file. Old grub-btrfs.cfg (if present) was not replaced."
+    print_error "Syntax errors were detected in generated ${grub_btrfs_directory}/grub-btrfs.new file. Old grub-btrfs.cfg (if present) was not replaced."
 fi
 
 # warn when this script is run but there is no entry in grub.cfg

Makefile

@@ -2,6 +2,7 @@ PKGNAME ?= grub-btrfs
 PREFIX ?= /usr
 
 INITCPIO ?= false
+MKINITRAMFS ?= false
 SYSTEMD ?= true
 OPENRC ?= false
 
@@ -59,6 +60,11 @@ install:
 		install -Dm644 "initramfs/Arch Linux/overlay_snap_ro-install" "$(LIB_DIR)/initcpio/install/grub-btrfs-overlayfs"; \
 		install -Dm644 "initramfs/Arch Linux/overlay_snap_ro-hook" "$(LIB_DIR)/initcpio/hooks/grub-btrfs-overlayfs"; \
 	 fi
+	@# Ubuntu like distros only :
+	@if test "$(MKINITRAMFS)" = true; then \
+		echo "Installing mkinitramfs hook"; \
+		initramfs/ubuntu/setup install; \
+	 fi
 	@install -Dm644 -t "$(SHARE_DIR)/licenses/$(PKGNAME)/" LICENSE
 	@install -Dm644 -t "$(SHARE_DIR)/doc/$(PKGNAME)/" README.md
 	@install -Dm644 "initramfs/readme.md" "$(SHARE_DIR)/doc/$(PKGNAME)/initramfs-overlayfs.md"
@@ -80,6 +86,7 @@ uninstall:
 	@rm -f "$(DESTDIR)/etc/conf.d/grub-btrfsd;"
 	@rm -f "$(LIB_DIR)/initcpio/install/grub-btrfs-overlayfs"
 	@rm -f "$(LIB_DIR)/initcpio/hooks/grub-btrfs-overlayfs"
+	@initramfs/ubuntu/setup uninstall || true
 	@rm -f "$(MAN_DIR)/man8/grub-btrfs.8.bz2"
 	@rm -f "$(MAN_DIR)/man8/grub-btrfsd.8.bz2"
 	@# Arch Linux UNlike distros only :
@@ -108,14 +115,15 @@ help:
 	@echo "           uninstall"
 	@echo "           help"
 	@echo
-	@echo "  parameter | type | description                    | defaults"
+	@echo "  parameter   | type | description                    | defaults"
-	@echo "  ----------+------+--------------------------------+----------------------------"
+	@echo "  ------------+------+--------------------------------+----------------------------"
-	@echo "  DESTDIR   | path | install destination            | <unset>"
+	@echo "  DESTDIR     | path | install destination            | <unset>"
-	@echo "  PREFIX    | path | system tree prefix             | '/usr'"
+	@echo "  PREFIX      | path | system tree prefix             | '/usr'"
-	@echo "  SHARE_DIR | path | shared data location           | '\$$(DESTDIR)\$$(PREFIX)/share'"
+	@echo "  SHARE_DIR   | path | shared data location           | '\$$(DESTDIR)\$$(PREFIX)/share'"
-	@echo "  LIB_DIR   | path | system libraries location      | '\$$(DESTDIR)\$$(PREFIX)/lib'"
+	@echo "  LIB_DIR     | path | system libraries location      | '\$$(DESTDIR)\$$(PREFIX)/lib'"
-	@echo "  PKGNAME   | name | name of the ditributed package | 'grub-btrfs'"
+	@echo "  PKGNAME     | name | name of the ditributed package | 'grub-btrfs'"
-	@echo "  INITCPIO  | bool | include mkinitcpio hook        | false"
+	@echo "  INITCPIO    | bool | include mkinitcpio hook        | false"
-	@echo "  SYSTEMD   | bool | include unit files             | true"
+	@echo "  MKINITRAMFS | bool | include mkinitramfs hook       | false"
-	@echo "  OPENRC    | bool | include OpenRc daemon          | false"
+	@echo "  SYSTEMD     | bool | include unit files             | true"
+	@echo "  OPENRC      | bool | include OpenRc daemon          | false"
 	@echo

README.md

@@ -1,8 +1,6 @@
 [![GitHub release](https://img.shields.io/github/release/Antynea/grub-btrfs.svg)](https://github.com/Antynea/grub-btrfs/releases)
 ![](https://img.shields.io/github/license/Antynea/grub-btrfs.svg)
 
-This is version 4.12 of grub-btrfs. 
-
 ## 💻 grub-btrfs 
 
 ##### BTC donation address: `1Lbvz244WA8xbpHek9W2Y12cakM6rDe5Rt`
@@ -106,13 +104,15 @@ Disable colors in output.
 * `-l / --log-file`
 This arguments specifies a file where grub-btrfsd should write log messages.
 * `-s / --syslog`
+* `-o / --timeshift-old`
+Look for snapshots in `/run/timeshift/backup/timeshift-btrfs` instead of `/run/timeshift/$PID/backup/timeshift-btrfs.` This is to be used for Timeshift versions <22.06.
 * `-t / --timeshift-auto`
 This is a flag to activate the auto detection of the path where Timeshift stores snapshots. Newer versions (>=22.06) of Timeshift mount their snapshots to `/run/timeshift/$PID/backup/timeshift-btrfs`. Where `$PID` is the process ID of the currently running Timeshift session. The PID is changing every time Timeshift is opened. grub-btrfsd can automatically take care of the detection of the correct PID and directory if this flag is set. In this case the argument `SNAPSHOTS_DIR` has no effect.
 * `-v / --verbose`
 Let the log of the daemon be more verbose
 * `-h / --help`
 Displays a short help message.
-
+- - - 
 ##### Systemd instructions
 To edit the arguments that are passed to the daemon, use 
 ```bash
@@ -129,7 +129,7 @@ sudo systemctl stop grub-btrfsd
 ```
 Then the daemon can be manually run and played around with using the command `/usr/bin/grub-btrfsd`. 
 For additional information on the daemon script and its arguments, run `grub-btrfsd -h` and see `man grub-btrfsd`
-
+- - -
 ##### OpenRC instructions
 To edit the arguments that are passed to the daemon edit the file `/etc/conf.d/grub-btrfsd`.  
 After that restart the daemon with
@@ -149,7 +149,7 @@ For additional information on daemon script and its arguments, run `grub-btrfsd
 Grub-btrfsd is a daemon daemon that watches the snapshot directory for you and updates the grub menu automatically every time a snapshot is created or deleted. 
 By default this daemon watches the directory `/.snapshots` for changes (creation or deletion of snapshots) and triggers the grub menu creation if a snapshot is found. 
 Therefore, if Snapper is used with its default directory, the daemon can just be started and nothing needs to be configured. For other configurations like Timeshift, or Snapper with a different directory, see further below. 
-
+- - - 
 #### SystemD instructions
 To start the daemon run 
 ```bash
@@ -162,11 +162,9 @@ sudo systemctl enable grub-btrfsd
 ```
 
 ##### 💼 Snapshots not in `/.snapshots`
-NOTE: This works also for Timeshift versions < 22.06, the path to watch would be `/run/timeshift/backup/timeshift-btrfs/snapshots`.
-
 By default the daemon is watching the directory `/.snapshots`. If the daemon should watch a different directory, it can be edited with
 ```bash
-sudo systemctl edit --full grub-btrfsd # for systemd
+sudo systemctl edit --full grub-btrfsd 
 ```
 What should be edited is the `/.snapshots`-part in the line that says `ExecStart=/usr/bin/grub-btrfsd --syslog /.snapshots`. 
 So this is what the file should look afterwards:
@@ -186,10 +184,11 @@ EnvironmentFile=/etc/default/grub-btrfs/config
 # SNAPSHOTS_DIR         Snapshot directory to watch, without effect when --timeshift-auto
 # Optional arguments:
 # -t, --timeshift-auto  Automatically detect Timeshifts snapshot directory
+# -o, --timeshift-old   Activate for timeshift versions <22.06
 # -l, --log-file        Specify a logfile to write to
 # -v, --verbose         Let the log of the daemon be more verbose
 # -s, --syslog          Write to syslog
-ExecStart=/usr/bin/grub-btrfsd --syslog /path/to/your/snapshot/directory
+ExecStart=/usr/bin/grub-btrfsd --syslog /.snapshots
 
 [Install]
 WantedBy=multi-user.target
@@ -205,10 +204,9 @@ Newer Timeshift versions create a new directory named after their process ID in
 Therefore the daemon can not simply watch a directory, it watches `/run/timeshift` first, if a directory is created it gets Timeshifts current PID, then watches a directory in that newly created directory from Timeshift. 
 Anyhow, to activate this mode of the daemon, `--timeshift-auto` must be passed to the daemon as a command line argument. 
 
-##### Systemd
 To pass `--timeshift-auto` to grub-btrfsd, the .service-file of grub-btrfsd can be edited with
 ```bash
-sudo systemctl edit --full grub-btrfsd # for systemd
+sudo systemctl edit --full grub-btrfsd 
 ```
 
 The line that says 
@@ -250,7 +248,7 @@ WantedBy=multi-user.target
 
 When done, the service must be restarted with
 ``` bash
-sudo systemctl restart grub-btrfsd # for systemd
+sudo systemctl restart grub-btrfsd 
 ```
 
 Note:
@@ -260,7 +258,7 @@ To revert all the changes use `systemctl revert grub-btrfsd`.
 ##### ❇️ Automatically update grub upon restart/boot:
 [Look at this comment](https://github.com/Antynea/grub-btrfs/issues/138#issuecomment-766918328)  
 Currently not implemented
-
+- - -
 #### OpenRC instructions
 To start the daemon run
 ```bash
@@ -285,26 +283,24 @@ After editing, the file should look like this:
 # Distributed under the terms of the GNU General Public License v3
 
 ## Where to locate the root snapshots
-#snapshots="/.snapshots" # Snapper in the root directory
+snapshots="/.snapshots" # Snapper in the root directory
 #snapshots="/run/timeshift/backup/timeshift-btrfs/snapshots" # Timeshift < v22.06
-snapshots="/path/to/your/snapshot/directory"
 
 ## Optional arguments to run with the daemon
+# Append options to this like this:
+# optional_args="--syslog --timeshift-auto --verbose"
 # Possible options are:
 # -t, --timeshift-auto  Automatically detect Timeshifts snapshot directory for timeshift >= 22.06
+# -o, --timeshift-old   Look for snapshots in directory of Timeshift <v22.06 (requires --timeshift-auto)
 # -l, --log-file        Specify a logfile to write to
 # -v, --verbose         Let the log of the daemon be more verbose
 # -s, --syslog          Write to syslog
-# Uncomment the line to activate the option
+optional_args="--syslog"
-optional_args+="--syslog " # write to syslog by default
-#optional_args+="--timeshift-auto "
-#optional_args+="--log-file /var/log/grub-btrfsd.log "
-#optional_args+="--verbose "
 ```
 
 After that, the daemon should be restarted with
 ``` bash
-sudo rc-service grub-btrfsd restart # for openRC
+sudo rc-service grub-btrfsd restart 
 ```
 
 ##### 🌟 Timeshift >= version 22.06
@@ -337,7 +333,7 @@ optional_args+="--timeshift-auto "
 
 After that, the daemon should be restarted with
 ``` bash
-sudo rc-service grub-btrfsd restart # for openRC
+sudo rc-service grub-btrfsd restart 
 ```
 
 ##### ❇️ Automatically update grub upon restart/boot:
@@ -386,6 +382,23 @@ sudo /usr/bin/grub-btrfsd /.snapshots --verbose` (for snapper)
 Or pass `--verbose` to the daemon using the Systemd .service-file or the OpenRC conf.d file respectively. (see Daemon installation instructions how to do that)
 
 - - -
+### Development
+Grub-btrfs uses a rudimentary system of automatic versioning to tell apart different commits. This is helpful when users report problems and it is not immediately clear what version they are using. 
+We therefore have the following script in `.git/hooks/pre-commit`:
+
+``` bash
+#!/bin/sh
+
+echo "Doing pre commit hook with version bump"
+version="$(git describe --tags --abbrev=0)-$(git rev-parse --abbrev-ref HEAD)-$(date -u -Iseconds)"
+echo "New version is ${version}"
+sed -i "s/GRUB_BTRFS_VERSION=.*/GRUB_BTRFS_VERSION=${version}/" config
+git add config
+```
+
+This automatically sets the version in the `config`-file to `[lasttag]-[branch-name]-[current-date-in-UTC]`.
+In order to create a Tag we don't want to have this long version. In this case we set the version manually in `config` and commit with `git commit --no-verify`. This avoids running the hook. 
+
 ### Special thanks for assistance and contributions
 * [Maxim Baz](https://github.com/maximbaz)
 * [Schievel1](https://github.com/Antynea/grub-btrfs/discussions/173#discussioncomment-1438790)

config

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 
-GRUB_BTRFS_VERSION=4.12
+GRUB_BTRFS_VERSION=4.12-master-2022-12-10T21:20:15+00:00
 
 # Disable grub-btrfs.
 # Default: "false"
@@ -99,6 +99,24 @@ GRUB_BTRFS_IGNORE_PREFIX_PATH=("var/lib/docker" "@var/lib/docker" "@/var/lib/doc
 # Default: "/boot"
 #GRUB_BTRFS_BOOT_DIRNAME="/boot"
 
+# Location where grub-btrfs.cfg should be saved.
+# Some distributions (like OpenSuSE) store those file at the snapshot directory
+# instead of boot. Be aware that this direcory must be available for grub during
+# startup of the system.
+# Default: "/boot/grub"
+#GRUB_BTRFS_GBTRFS_DIRNAME="/boot/grub"
+
+# Location of the directory where Grub searches for the grub-btrfs.cfg file.
+# Some distributions (like OpenSuSE) store those file at the snapshot directory
+# instead of boot. Be aware that this direcory must be available for grub during
+# startup of the system.
+# Default: "\${prefix}" # This is a grub variable that resolves to where grub is
+# installed. (like /boot/grub, /boot/efi/grub)
+# NOTE: If variables of grub are used here (like ${prefix}) they need to be escaped
+# with `\` before the `$`
+#GRUB_BTRFS_GBTRFS_SEARCH_DIRNAME="\${prefix}"
+
+
 # Name/path of grub-mkconfig command, use by "grub-btrfs.service"
 # Might be 'grub2-mkconfig' on some systems (Fedora ...)
 # Default paths are /sbin:/bin:/usr/sbin:/usr/bin,

grub-btrfsd

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/usr/bin/env bash
 # Copyright 2022 Pascal Jaeger
 # Distributed under the terms of the GNU General Public License v3
 # Update GRUB when new BTRFS snapshots are created.
@@ -9,6 +9,7 @@ watchtime=0
 logfile=0
 snapshots=-1
 timeshift_auto=false
+timeshift_old=false
 verbose=false
 syslog=false
 
@@ -31,8 +32,8 @@ setcolors true # normally we want colors
 sysconfdir="/etc"
 grub_btrfs_config="${sysconfdir}/default/grub-btrfs/config"
 # source config file
-[[ -f "$grub_btrfs_config" ]] && . "$grub_btrfs_config"
+[ -f "$grub_btrfs_config" ] && . "$grub_btrfs_config"
-[[ -f "${sysconfdir}/default/grub" ]] && . "${sysconfdir}/default/grub"
+[ -f "${sysconfdir}/default/grub" ] && . "${sysconfdir}/default/grub"
 
 print_help() {
             echo "${CYAN}[?] Usage:"
@@ -44,6 +45,7 @@ print_help() {
             echo "-c, --no-color        Disable colors in output"
             echo "-l, --log-file        Specify a logfile to write to"
             echo "-s, --syslog          Write to syslog"
+            echo "-o, --timeshift-old   Look for snapshots in directory of Timeshift <v22.06 (requires --timeshift-auto)"
             echo "-t, --timeshift-auto  Automatically detect Timeshifts snapshot directory"
             echo "-v, --verbose         Let the log of the daemon be more verbose"
             echo "-h, --help            Display this message"
@@ -97,6 +99,9 @@ while getopts :l:ctvsh-: opt; do
                 timeshift-auto)
                     timeshift_auto=true
                     ;;
+                timeshift-old)
+                    timeshift_old=true
+                    ;;
                 verbose)
                     verbose=true
                     ;;
@@ -125,6 +130,9 @@ while getopts :l:ctvsh-: opt; do
         t)
             timeshift_auto=true
             ;;
+        o)
+            timeshift_old=true
+            ;;
         v)
             verbose=true
             ;;
@@ -150,7 +158,7 @@ shift $(( OPTIND - 1 ))
 snapshots="${1}"
 
 # check if inotify exists, see issue #227
-if ! command -v inotifywait &> /dev/null; then
+if ! command -v inotifywait >/dev/null 2>&1; then
     err "[!] inotifywait was not found, exiting. Is inotify-tools installed?" "${RED}" >&2
     exit 1
 fi
@@ -168,9 +176,15 @@ else
     inotify_qiet_flag=" -q -q "
 fi
 
+if [ ${timeshift_auto} = false ] && [ ${timeshift_old} = true ]; then
+    err "[!] Flag --timeshift-old requires flag --timeshift-auto" "${RED}" >&2
+    exit 1
+fi
+
 vlog "Arguments:"
 vlog "Snapshot directory: $snapshots"
 vlog "Timestift autodetection: $timeshift_auto"
+vlog "Timeshift old: $timeshift_old"
 vlog "Logfile: $logfile"
 
 if ! [ -d "$snapshots" ] && ! [ ${timeshift_auto} = true ]; then
@@ -204,6 +218,15 @@ create_grub_menu() {
     fi
 }
 
+set_snapshot_dir() {
+    # old timeshift has it's snapshot dir in a different location
+    if [ "${timeshift_old}" = true ]; then
+          snapshots="/run/timeshift/backup/timeshift-btrfs/snapshots"
+    else
+          snapshots="/run/timeshift/${timeshift_pid}/backup/timeshift-btrfs/snapshots"
+    fi
+}
+
 # start the actual daemon
 vlog "Snapshot dir watchtimeout: $watchtime"
 vlog "Entering infinite while" "${GREEN}"
@@ -217,7 +240,7 @@ while true; do
         fi
         timeshift_pid=$(ps ax | awk '{sub(/.*\//, "", $5)} $5 ~ /timeshift/ {print $1}')
         if [ "${#timeshift_pid}" -gt 0 ]; then
-            snapshots="/run/timeshift/${timeshift_pid}/backup/timeshift-btrfs/snapshots"
+            set_snapshot_dir
             log "detected running Timeshift at daemon startup, PID is: $timeshift_pid"
             vlog "new snapshots directory is $snapshots"
         else
@@ -225,7 +248,7 @@ while true; do
             inotifywait ${inotify_qiet_flag} -e create -e delete /run/timeshift && {
                 sleep 1
                 timeshift_pid=$(ps ax | awk '{sub(/.*\//, "", $5)} $5 ~ /timeshift/ {print $1}')
-                snapshots="/run/timeshift/${timeshift_pid}/backup/timeshift-btrfs/snapshots"
+                set_snapshot_dir
                 log "detected Timeshift startup, PID is: $timeshift_pid" "${CYAN}"
                 vlog "new snapshots directory is $snapshots" "${CYAN}"
                 (create_grub_menu) # create the grub menu once immidiatly in a forking process. Snapshots from commandline using timeshift --create need this

grub-btrfsd.confd

@@ -6,13 +6,12 @@ snapshots="/.snapshots" # Snapper in the root directory
 #snapshots="/run/timeshift/backup/timeshift-btrfs/snapshots" # Timeshift < v22.06
 
 ## Optional arguments to run with the daemon
+# Append options to this like this:
+# optional_args="--syslog --timeshift-auto --verbose"
 # Possible options are:
 # -t, --timeshift-auto  Automatically detect Timeshifts snapshot directory for timeshift >= 22.06
+# -o, --timeshift-old   Look for snapshots in directory of Timeshift <v22.06 (requires --timeshift-auto)
 # -l, --log-file        Specify a logfile to write to
 # -v, --verbose         Let the log of the daemon be more verbose
 # -s, --syslog          Write to syslog
-# Uncomment the line to activate the option
+optional_args="--syslog"
-optional_args+="--syslog " # write to syslog by default
-#optional_args+="--timeshift-auto "
-#optional_args+="--log-file /var/log/grub-btrfsd.log "
-#optional_args+="--verbose "

grub-btrfsd.service

@@ -13,6 +13,7 @@ EnvironmentFile=/etc/default/grub-btrfs/config
 # SNAPSHOTS_DIR         Snapshot directory to watch, without effect when --timeshift-auto
 # Optional arguments:
 # -t, --timeshift-auto  Automatically detect Timeshifts snapshot directory
+# -o, --timeshift-old   Activate for timeshift versions <22.06
 # -l, --log-file        Specify a logfile to write to
 # -v, --verbose         Let the log of the daemon be more verbose
 # -s, --syslog          Write to syslog

initramfs/readme.md

@@ -39,6 +39,13 @@ You notice that the name of the `hook` must match the name of the 2 installed fi
 Re-generate your initramfs  
 `mkinitcpio -P` (option -P means, all preset present in `/etc/mkinitcpio.d`)
 
+#### Ubuntu
+ Install initramfs scripts & re-generate initramfs.
+
+``` shell
+sudo initramfs/ubuntu/setup install
+```
+
 #### Other distribution
 Refer to your distribution's documentation  
 or contribute to this project to add a paragraph.

initramfs/ubuntu/hooks/grub-btrfs-overlay

@@ -0,0 +1,15 @@
+#!/bin/sh -e
+PREREQ=
+prereqs() {
+	echo "$PREREQ"
+}
+case "$1" in
+	prereqs)
+		prereqs
+		exit 0
+		;;
+esac
+
+. /usr/share/initramfs-tools/hook-functions
+manual_add_modules overlay
+copy_exec /usr/bin/findmnt /usr/bin

initramfs/ubuntu/scripts/local-bottom/grub-btrfs-overlay

@@ -0,0 +1,32 @@
+#!/bin/sh -e
+PREREQ=
+prereqs() {
+	echo "$PREREQ"
+}
+case $1 in
+	prereqs)
+		prereqs
+		exit 0
+		;;
+esac
+
+. /scripts/functions
+on_err() {
+	log_failure_msg 'error setting up overlay'
+}
+trap on_err ERR
+if [ -x /usr/bin/btrfs -a -x /usr/bin/findmnt ] &&
+		 [ "$(findmnt -no FSTYPE -M "$rootmnt")" = btrfs ] &&
+		 [ "$(btrfs property get $rootmnt ro)" != ro=false ]
+then
+	log_begin_msg 'remount read-only subvolume as read-only layer in non-persistent, writable overlay'
+	trap log_end_msg EXIT
+	lower_dir="$(mktemp -dp /)"
+	ram_dir="$(mktemp -dp /)"
+	upper_dir="$ram_dir"/upper
+	work_dir="$ram_dir"/work
+	mount --move "$rootmnt" "$lower_dir"
+	mount -t tmpfs cowspace "$ram_dir"
+	mkdir -p "$upper_dir" "$work_dir"
+	mount -t overlay -o lowerdir="$lower_dir",upperdir="$upper_dir",workdir="$work_dir" rootfs "$rootmnt"
+fi

initramfs/ubuntu/setup

@@ -0,0 +1,70 @@
+#!/usr/bin/env bash
+log() {
+	local CODE=$?
+	echo >&2 "$*"
+	return $CODE
+}
+print-help() {
+	log "\
+usage: ${0##*/} [-h] [--] (install|uninstall)
+Install initramfs scripts for Ubuntu.
+
+# Options
+-h	display this help & exit
+
+# Subcommands
+install	install initramfs scripts
+uninstall	remove initramfs scripts"
+}
+usage-error() {
+	print-help
+	exit 2
+}
+action-install() {
+	local SCRIPT_DIR="$(cd -P -- "$(dirname -- "$BASH_SOURCE")" && pwd)"
+	install {"$SCRIPT_DIR",/etc/initramfs-tools}/hooks/grub-btrfs-overlay
+	install {"$SCRIPT_DIR",/etc/initramfs-tools}/scripts/local-bottom/grub-btrfs-overlay
+}
+action-uninstall() {
+	rm -f /etc/initramfs-tools/{hooks,scripts/local-bottom}/grub-btrfs-overlay
+}
+set -e
+while getopts h OPT
+do case "$OPT" in
+	h)
+		print-help
+		exit
+	;;
+	*)
+		usage-error
+esac done
+shift $(( OPTIND - 1 ))
+OPTIND=1
+ACTION=
+case "$#" in
+	0)
+		log event: a subcommand is required
+		usage-error
+		;;
+	1)
+		case "$1" in
+			install|uninstall)
+				ACTION="action-$1"
+				;;
+			*)
+				log "\
+event: unknown subcommand
+subcommand: $1"
+				usage-error
+		esac
+		;;
+	*)
+		log "\
+event: too many arguments
+arguments: $*"
+		usage-error
+esac
+"$ACTION" || log "\
+event: execution failure
+suggestion: rerun with sudo"
+exec update-initramfs -u

manpages/grub-btrfs.8.man

@@ -48,16 +48,16 @@ Example: \fCGRUB_BTRFS_DISABLE="true"\fP
 The snapshot entries submenu in Grub are added according to this line. It is possible to change to order of the fields.
 .IP \(em 4
 Default: (“date” “snapshot” “type” “description”)
-.PP
+.IP \(em 4
--Example: \fCGRUB_BTRFS_TITLE_FORMAT=("date" "snapshot" "type" "description")\fP
+Example: \fCGRUB_BTRFS_TITLE_FORMAT=("date" "snapshot" "type" "description")\fP
 
 .SS "\fCGRUB_BTRFS_LIMIT\fP"
 .PP
 Maximum number of snapshots in the GRUB snapshots sub menu.
 .IP \(em 4
 Default: “50”
-.PP
+.IP \(em 4
--Example: \fCGRUB_BTRFS_LIMIT="50"\fP
+Example: \fCGRUB_BTRFS_LIMIT="50"\fP
 
 .SS "\fCGRUB_BTRFS_SUBVOLUME_SORT\fP"
 .PP
@@ -69,16 +69,16 @@ See Sorting section in
 “-rootid” means list snapshot by new ones first.
 .IP \(em 4
 Default: “-rootid”
-.PP
+.IP \(em 4
--Example: \fCGRUB_BTRFS_SUBVOLUME_SORT="+ogen,\-gen,path,rootid"\fP
+Example: \fCGRUB_BTRFS_SUBVOLUME_SORT="+ogen,\-gen,path,rootid"\fP
 
 .SS "\fCGRUB_BTRFS_SHOW_SNAPSHOTS_FOUND\fP"
 .PP
 Show snapshots found during run “grub-mkconfig”
 .IP \(em 4
 Default: “true”
-.PP
+.IP \(em 4
--Example: \fCGRUB_BTRFS_SHOW_SNAPSHOTS_FOUND="false"\fP
+Example: \fCGRUB_BTRFS_SHOW_SNAPSHOTS_FOUND="false"\fP
 
 .SS "\fCGRUB_BTRFS_ROOTFLAGS\fP"
 .PP
@@ -89,8 +89,8 @@ takes priority over `fstab` entries.
 NB: Do NOT include “subvol=...” or “subvolid=...” here.
 .IP \(em 4
 Default: “”
-.PP
+.IP \(em 4
--Example: \fCGRUB_BTRFS_ROOTFLAGS="space_cache,commit=10,norecovery"\fP
+Example: \fCGRUB_BTRFS_ROOTFLAGS="space_cache,commit=10,norecovery"\fP
 
 .SS "\fCGRUB_BTRFS_OVERRIDE_BOOT_PARTITION_DETECTION\fP"
 .PP
@@ -99,8 +99,8 @@ either located at the system root or on a separate partition or in a subvolume,
 Change to “true” if your boot partition is not detected as separate.
 .IP \(em 4
 Default: “false”
-.PP
+.IP \(em 4
--Example: \fCGRUB_BTRFS_OVERRIDE_BOOT_PARTITION_DETECTION="true"\fP
+Example: \fCGRUB_BTRFS_OVERRIDE_BOOT_PARTITION_DETECTION="true"\fP
 
 .SS "CUSTOM KERNELS"
 .SS "\fCGRUB_BTRFS_NKERNEL\fP / \fCGRUB_BTRFS_NINIT\fP / \fCGRUB_BTRFS_CUSTOM_MICROCODE\fP"
@@ -109,10 +109,10 @@ By default, “grub-btrfs” automatically detects most existing kernels, initra
 Customs kernel, initramfs and microcodes that are not detected can be added in these variables.
 .IP \(em 4
 Default: (“”)
-.PP
+.IP \(em 4
--Example: \fCGRUB_BTRFS_NKERNEL=("kernel\-5.19.4\-custom" "vmlinux\-5.19.4\-custom")\fP
+Example: \fCGRUB_BTRFS_NKERNEL=("kernel\-5.19.4\-custom" "vmlinux\-5.19.4\-custom")\fP
-          \fCGRUB_BTRFS_NINIT=("initramfs\-5.19.4\-custom.img" "initrd\-5.19.4\-custom.img" "otherinit\-5.19.4\-custom.gz")\fP
+\fCGRUB_BTRFS_NINIT=("initramfs\-5.19.4\-custom.img" "initrd\-5.19.4\-custom.img" "otherinit\-5.19.4\-custom.gz")\fP
-          \fCGRUB_BTRFS_CUSTOM_MICROCODE=("custom\-ucode.img" "custom\-uc.img "custom_ucode.cpio")\fP
+\fCGRUB_BTRFS_CUSTOM_MICROCODE=("custom\-ucode.img" "custom\-uc.img "custom_ucode.cpio")\fP
 
 .SS "SNAPSHOT FILTERING"
 .SS "\fCGRUB_BTRFS_IGNORE_SPECIFIC_PATH\fP"
@@ -122,8 +122,8 @@ Only exact paths are ignored.
 e.g : if `specific path` = @, only `@` snapshot will be ignored.
 .IP \(em 4
 Default: (“@”)
-.PP
+.IP \(em 4
--Example: \fCGRUB_BTRFS_IGNORE_SPECIFIC_PATH=("@home")\fP
+Example: \fCGRUB_BTRFS_IGNORE_SPECIFIC_PATH=("@home")\fP
 
 .SS "\fCGRUB_BTRFS_IGNORE_PREFIX_PATH\fP"
 .PP
@@ -132,8 +132,8 @@ Any path starting with the specified string will be ignored.
 e.g : if `prefix path` = @, all snapshots beginning with “@/...” will be ignored.
 .IP \(em 4
 Default: (“var/lib/docker” “@var/lib/docker” “@/var/lib/docker”)
-.PP
+.IP \(em 4
--Example: \fCGRUB_BTRFS_IGNORE_PREFIX_PATH=("var/lib/docker" "@var/lib/docker" "@/var/lib/docker")\fP
+Example: \fCGRUB_BTRFS_IGNORE_PREFIX_PATH=("var/lib/docker" "@var/lib/docker" "@/var/lib/docker")\fP
 
 .SS "\fCGRUB_BTRFS_IGNORE_SNAPSHOT_TYPE\fP"
 .PP
@@ -144,16 +144,16 @@ For Timeshift:
 Tag = boot, ondemand, hourly, daily, weekly, monthly.
 .IP \(em 4
 Default: (“”)
-.PP
+.IP \(em 4
--Example: \fCGRUB_BTRFS_IGNORE_SNAPSHOT_TYPE=("ondemand")\fP
+Example: \fCGRUB_BTRFS_IGNORE_SNAPSHOT_TYPE=("ondemand")\fP
 
 .SS "\fCGRUB_BTRFS_IGNORE_SNAPSHOT_DESCRIPTION\fP"
 .PP
 Ignore specific description of snapshot during run “grub-mkconfig”.
 .IP \(em 4
 Default: (“”)
-.PP
+.IP \(em 4
--Example: \fCGRUB_BTRFS_IGNORE_SNAPSHOT_DESCRIPTION=("timeline")\fP
+Example: \fCGRUB_BTRFS_IGNORE_SNAPSHOT_DESCRIPTION=("timeline")\fP
 
 .SS "DISTRIBUTION DEPENDENT SETTINGS"
 .SS "\fCGRUB_BTRFS_BOOT_DIRNAME\fP"
@@ -162,8 +162,8 @@ Location of kernels/initramfs/microcode.
 Used by “grub-btrfs” to detect the boot partition and the location of kernels, initramfs and microcodes.
 .IP \(em 4
 Default: “/boot”
-.PP
+.IP \(em 4
--Example: \fCGRUB_BTRFS_BOOT_DIRNAME="/"\fP
+Example: \fCGRUB_BTRFS_BOOT_DIRNAME="/"\fP
 
 .SS "\fCGRUB_BTRFS_GRUB_DIRNAME\fP"
 .PP
@@ -173,8 +173,37 @@ Might be grub2 on some systems.
 For example, on Fedora with EFI : “/boot/efi/EFI/fedora”
 .IP \(em 4
 Default: “/boot/grub”
+.IP \(em 4
+Example: \fCGRUB_BTRFS_GRUB_DIRNAME="/boot/grub2"\fP
+
+.SS "\fCGRUB_BTRFS_GBTRFS_DIRNAME\fP"
 .PP
--Example: \fCGRUB_BTRFS_GRUB_DIRNAME="/boot/grub2"\fP
+Location where grub-btrfs.cfg should be saved.
+Some distributions (like OpenSuSE) store those file at the snapshot directory
+instead of boot. Be aware that this direcory must be available for grub during
+startup of the system.
+.IP \(em 4
+Default: “/boot/grub”
+.IP \(em 4
+Example GRUB\d\s-2BTRFS\s+2\u\d\s-2GBTRFS\s+2\u\d\s-2DIRNAME\s+2\u=“/boot/grub”
+
+.SS "\fCGRUB_BTRFS_GBTRFS_SEARCH_DIRNAME\fP"
+.PP
+Location of the directory where Grub searches for the grub-btrfs.cfg file.
+Some distributions (like OpenSuSE) store those file at the snapshot directory
+instead of boot. Be aware that this direcory must be available for grub during
+startup of the system.
+.IP \(em 4
+Default: “\${prefix}” (This is a grub variable that resolves to where grub is
+.PP
+installed. (like /boot/grub, /boot/efi/grub))
+.IP \(em 4
+NOTE: If variables of grub are used here like ${prefix}, they need to be escaped
+.PP
+with `$\` before the `$`
+.IP \(em 4
+Example: GRUB\d\s-2BTRFS\s+2\u\d\s-2GBTRFS\s+2\u\d\s-2SEARCH\s+2\u\d\s-2DIRNAME\s+2\u=“\${prefix}”
+
 
 .SS "\fCGRUB_BTRFS_MKCONFIG\fP"
 .PP
@@ -184,8 +213,8 @@ Default paths are /sbin:/bin:/usr/sbin:/usr/bin, if your path is missing, report
 You can use the name of the command only or full the path.
 .IP \(em 4
 Default: grub-mkconfig
-.PP
+.IP \(em 4
--Example: \fCGRUB_BTRFS_MKCONFIG=/sbin/grub2\-mkconfig\fP
+Example: \fCGRUB_BTRFS_MKCONFIG=/sbin/grub2\-mkconfig\fP
 
 .SS "\fCGRUB_BTRFS_SCRIPT_CHECK\fP"
 .PP

manpages/grub-btrfs.8.org

@@ -35,12 +35,12 @@ Disable grub-btrfs if true.
 *** ~GRUB_BTRFS_TITLE_FORMAT~
 The snapshot entries submenu in Grub are added according to this line. It is possible to change to order of the fields.
 - Default: ("date" "snapshot" "type" "description")
--Example: ~GRUB_BTRFS_TITLE_FORMAT=("date" "snapshot" "type" "description")~
+- Example: ~GRUB_BTRFS_TITLE_FORMAT=("date" "snapshot" "type" "description")~
 
 *** ~GRUB_BTRFS_LIMIT~
 Maximum number of snapshots in the GRUB snapshots sub menu.
 - Default: "50"
--Example: ~GRUB_BTRFS_LIMIT="50"~
+- Example: ~GRUB_BTRFS_LIMIT="50"~
 
 *** ~GRUB_BTRFS_SUBVOLUME_SORT~
 Sort the found subvolumes by "ogeneration" or "generation" or "path" or "rootid".
@@ -50,12 +50,12 @@ Sort the found subvolumes by "ogeneration" or "generation" or "path" or "rootid"
 #+END_MAN
 "-rootid" means list snapshot by new ones first.
 - Default: "-rootid"
--Example: ~GRUB_BTRFS_SUBVOLUME_SORT="+ogen,-gen,path,rootid"~
+- Example: ~GRUB_BTRFS_SUBVOLUME_SORT="+ogen,-gen,path,rootid"~
 
 *** ~GRUB_BTRFS_SHOW_SNAPSHOTS_FOUND~
 Show snapshots found during run "grub-mkconfig"
 - Default: "true"
--Example: ~GRUB_BTRFS_SHOW_SNAPSHOTS_FOUND="false"~
+- Example: ~GRUB_BTRFS_SHOW_SNAPSHOTS_FOUND="false"~
 
 *** ~GRUB_BTRFS_ROOTFLAGS~
 Comma seperated mount options to be used when booting a snapshot.
@@ -64,14 +64,14 @@ They can be defined here as well as in the "/" line inside the respective snapsh
 takes priority over `fstab` entries.
 NB: Do NOT include "subvol=..." or "subvolid=..." here.
 - Default: ""
--Example: ~GRUB_BTRFS_ROOTFLAGS="space_cache,commit=10,norecovery"~
+- Example: ~GRUB_BTRFS_ROOTFLAGS="space_cache,commit=10,norecovery"~
 
 *** ~GRUB_BTRFS_OVERRIDE_BOOT_PARTITION_DETECTION~
 By default "grub-btrfs" automatically detects your boot partition,
 either located at the system root or on a separate partition or in a subvolume,
 Change to "true" if your boot partition is not detected as separate.
 - Default: "false"
--Example: ~GRUB_BTRFS_OVERRIDE_BOOT_PARTITION_DETECTION="true"~
+- Example: ~GRUB_BTRFS_OVERRIDE_BOOT_PARTITION_DETECTION="true"~
 
 ** CUSTOM KERNELS
 
@@ -79,7 +79,7 @@ Change to "true" if your boot partition is not detected as separate.
 By default, "grub-btrfs" automatically detects most existing kernels, initramfs and microcode.
 Customs kernel, initramfs and microcodes that are not detected can be added in these variables.
 - Default: ("")
--Example: ~GRUB_BTRFS_NKERNEL=("kernel-5.19.4-custom" "vmlinux-5.19.4-custom")~
+- Example: ~GRUB_BTRFS_NKERNEL=("kernel-5.19.4-custom" "vmlinux-5.19.4-custom")~
           ~GRUB_BTRFS_NINIT=("initramfs-5.19.4-custom.img" "initrd-5.19.4-custom.img" "otherinit-5.19.4-custom.gz")~
           ~GRUB_BTRFS_CUSTOM_MICROCODE=("custom-ucode.img" "custom-uc.img "custom_ucode.cpio")~
 
@@ -90,14 +90,14 @@ Ignore specific path during run "grub-mkconfig".
 Only exact paths are ignored.
 e.g : if `specific path` = @, only `@` snapshot will be ignored.
 - Default: ("@")
--Example: ~GRUB_BTRFS_IGNORE_SPECIFIC_PATH=("@home")~
+- Example: ~GRUB_BTRFS_IGNORE_SPECIFIC_PATH=("@home")~
 
 *** ~GRUB_BTRFS_IGNORE_PREFIX_PATH~
 Ignore prefix path during run "grub-mkconfig".
 Any path starting with the specified string will be ignored.
 e.g : if `prefix path` = @, all snapshots beginning with "@/..." will be ignored.
 - Default: ("var/lib/docker" "@var/lib/docker" "@/var/lib/docker")
--Example: ~GRUB_BTRFS_IGNORE_PREFIX_PATH=("var/lib/docker" "@var/lib/docker" "@/var/lib/docker")~
+- Example: ~GRUB_BTRFS_IGNORE_PREFIX_PATH=("var/lib/docker" "@var/lib/docker" "@/var/lib/docker")~
 
 *** ~GRUB_BTRFS_IGNORE_SNAPSHOT_TYPE~
 Ignore specific type/tag of snapshot during run "grub-mkconfig".
@@ -106,12 +106,12 @@ Type = single, pre, post.
 For Timeshift:
 Tag = boot, ondemand, hourly, daily, weekly, monthly.
 - Default: ("")
--Example: ~GRUB_BTRFS_IGNORE_SNAPSHOT_TYPE=("ondemand")~
+- Example: ~GRUB_BTRFS_IGNORE_SNAPSHOT_TYPE=("ondemand")~
 
 *** ~GRUB_BTRFS_IGNORE_SNAPSHOT_DESCRIPTION~
 Ignore specific description of snapshot during run "grub-mkconfig".
 - Default: ("")
--Example: ~GRUB_BTRFS_IGNORE_SNAPSHOT_DESCRIPTION=("timeline")~
+- Example: ~GRUB_BTRFS_IGNORE_SNAPSHOT_DESCRIPTION=("timeline")~
 
 ** DISTRIBUTION DEPENDENT SETTINGS
 
@@ -119,7 +119,7 @@ Ignore specific description of snapshot during run "grub-mkconfig".
 Location of kernels/initramfs/microcode.
 Used by "grub-btrfs" to detect the boot partition and the location of kernels, initramfs and microcodes.
 - Default: "/boot"
--Example: ~GRUB_BTRFS_BOOT_DIRNAME="/"~
+- Example: ~GRUB_BTRFS_BOOT_DIRNAME="/"~
 
 *** ~GRUB_BTRFS_GRUB_DIRNAME~
 Location of the folder containing the "grub.cfg" file.
@@ -127,7 +127,27 @@ Used by grub-btrfs to save the file "grub-btrfs.cfg".
 Might be grub2 on some systems.
 For example, on Fedora with EFI : "/boot/efi/EFI/fedora"
 - Default: "/boot/grub"
--Example: ~GRUB_BTRFS_GRUB_DIRNAME="/boot/grub2"~
+- Example: ~GRUB_BTRFS_GRUB_DIRNAME="/boot/grub2"~
+
+*** ~GRUB_BTRFS_GBTRFS_DIRNAME~
+ Location where grub-btrfs.cfg should be saved.
+ Some distributions (like OpenSuSE) store those file at the snapshot directory
+ instead of boot. Be aware that this direcory must be available for grub during
+ startup of the system.
+- Default: "/boot/grub"
+- Example GRUB_BTRFS_GBTRFS_DIRNAME="/boot/grub"
+
+*** ~GRUB_BTRFS_GBTRFS_SEARCH_DIRNAME~
+Location of the directory where Grub searches for the grub-btrfs.cfg file.
+Some distributions (like OpenSuSE) store those file at the snapshot directory
+instead of boot. Be aware that this direcory must be available for grub during
+startup of the system.
+- Default: "\${prefix}" (This is a grub variable that resolves to where grub is
+installed. (like /boot/grub, /boot/efi/grub))
+- NOTE: If variables of grub are used here like ${prefix}, they need to be escaped
+with `\` before the `$`
+- Example: GRUB_BTRFS_GBTRFS_SEARCH_DIRNAME="\${prefix}"
+
 
 *** ~GRUB_BTRFS_MKCONFIG~
 Name/path of the command to generate the grub menu, used by "grub-btrfs.service"
@@ -135,7 +155,7 @@ Might be 'grub2-mkconfig' on some systems (e.g. Fedora)
 Default paths are /sbin:/bin:/usr/sbin:/usr/bin, if your path is missing, report it on the upstream project.
 You can use the name of the command only or full the path.
 - Default: grub-mkconfig
--Example: ~GRUB_BTRFS_MKCONFIG=/sbin/grub2-mkconfig~
+- Example: ~GRUB_BTRFS_MKCONFIG=/sbin/grub2-mkconfig~
 
 *** ~GRUB_BTRFS_SCRIPT_CHECK~
 Name of grub-script-check command, used by "grub-btrfs"

manpages/grub-btrfsd.8.man

@@ -9,7 +9,7 @@ when a new btrfs snapshot is created.
 
 .SH "SYNOPSIS"
 .PP
-\fCgrub\-btrfsd [\-h, \-\-help] [\-c, \-\-no\-color] [\-l, \-\-log\-file LOG_FILE] [\-s, \-\-syslog] [\-t, \-\-timeshift\-auto] [\-v, \-\-verbose] SNAPSHOTS_DIR\fP
+\fCgrub\-btrfsd [\-h, \-\-help] [\-c, \-\-no\-color] [\-l, \-\-log\-file LOG_FILE] [\-s, \-\-syslog] [\-t, \-\-timeshift\-auto] [\-o, \-\-timeshift\-old] [\-v, \-\-verbose] SNAPSHOTS_DIR\fP
 
 .SH "DESCRIPTION"
 .PP
@@ -38,6 +38,10 @@ Write to syslog
 .PP
 This is a flag to activate the auto detection of the path where Timeshift stores snapshots. Newer versions (>=22.06) of Timeshift mount their snapshots to \fC/run/timeshift/$PID/backup/timeshift\-btrfs\fP. Where \fC$PID\fP is the process ID of the currently running Timeshift session. The PID is changing every time Timeshift is opened. grub-btrfsd can automatically take care of the detection of the correct PID and directory if this flag is set. In this case the argument \fCSNAPSHOTS_DIR\fP has no effect.
 
+.SS "\fC\-o / \-\-timeshift\-old\fP"
+.PP
+Look for snapshots in \fC/run/timeshift/backup/timeshift\-btrfs\fP instead of \fC/run/timeshift/$PID/backup/timeshift\-btrfs\fP. This is to be used for Timeshift versions <22.06.
+
 .SS "\fC\-v / \-\-verbose\fP"
 .PP
 Let the log of the daemon be more verbose

manpages/grub-btrfsd.8.org

@@ -10,7 +10,7 @@ grub-btrfsd - An OpenRC daemon to automatically update the grub menu with
 when a new btrfs snapshot is created.
 
 * SYNOPSIS
-~grub-btrfsd [-h, --help] [-c, --no-color] [-l, --log-file LOG_FILE] [-s, --syslog] [-t, --timeshift-auto] [-v, --verbose] SNAPSHOTS_DIR~
+~grub-btrfsd [-h, --help] [-c, --no-color] [-l, --log-file LOG_FILE] [-s, --syslog] [-t, --timeshift-auto] [-o, --timeshift-old] [-v, --verbose] SNAPSHOTS_DIR~
 
 * DESCRIPTION
 Grub-btrfsd is a shell script which is meant to be run as a daemon.
@@ -33,6 +33,9 @@ Write to syslog
 ** ~-t / --timeshift-auto~
 This is a flag to activate the auto detection of the path where Timeshift stores snapshots. Newer versions (>=22.06) of Timeshift mount their snapshots to ~/run/timeshift/$PID/backup/timeshift-btrfs~. Where ~$PID~ is the process ID of the currently running Timeshift session. The PID is changing every time Timeshift is opened. grub-btrfsd can automatically take care of the detection of the correct PID and directory if this flag is set. In this case the argument ~SNAPSHOTS_DIR~ has no effect.
 
+** ~-o / --timeshift-old~
+Look for snapshots in ~/run/timeshift/backup/timeshift-btrfs~ instead of ~/run/timeshift/$PID/backup/timeshift-btrfs~. This is to be used for Timeshift versions <22.06.
+
 ** ~-v / --verbose~
 Let the log of the daemon be more verbose